|
STEERING BOX SKIDS
Protect the steering gear box on your TJ with this quality made skid from Kilby Enterprises!
Features laser cut 3/16" steel and formed to a perfect fit. Can be used
with the factory bumper as well as many after market bumpers. Don't let
your gear box get damaged!
GAS TANK SKID
TJ GAS TANK SKID
Kilbys Gas Tank Skid
Plate offers excellent protection for the Jeep TJ. This skid was built
from 3/16" steel plate in 3 pieces that were laser cut, formed and
welded together. It utilizes the stock mounting locations to keep the
installation time to a minimum. You will not use the stock tin shield
as part of this skid.
Our
TJ skid has been moved to the passenger side by 3/4" to allow for more
shock clearance on the driver side and it raises the tank up another 1"
for increased clearance over stock setups and even more vs. other skids
that go over the stock shield. The rear of the skid has a departure
angle built in to aid in sliding over obstacles. The front has a new
design allowing 3/4" more differential clearance over the previous
design. Four drain holes are incorporated into the design and the
factory straps are used to secure the tank to the skid. More material
has been removed from the front of the skid to give the track bar more room to cycle.
This
skid will fit 1997-2002 TJ's without a body lift with slight
modification to the tank straps. 2003 Wranglers will require a 1" body
lift due to the new changes.
At 60 lbs each, this skid is no lightweight! YJ GAS TANK SKID
Built similar to our TJ skid,
our YJ skid also uses laser cut 3/16" steel which is formed and welded
for complete protection against the elements. This skid does not cover
the stock skid, it replaces it. Four drain holes are incorporated into
the design and the factory straps are used to secure the tank to the
skid. Because of the cross member that sits above the front of the gas
tank, this skid cannot be raised to gain more ground clearance. The
skid was designed to offer the maximum allowable side and differential
clearance.
CJ GAS TANK SKID (Fits 1976-86 OEM 20 gallon tank only)
Laser cut, formed and welded
together for excellent accuracy and great looks. Our CJ skid is cut
from 3/16" steel and offers excellent protection against the elements.
Four drain holes are incorporated into the design and the factory
straps are used to secure the tank to the skid. This skid fits the
stock 20 gallon plastic tank only. Because of the cross member that
sits above the front of the gas tank, this skid cannot be raised to
gain more ground clearance. The skid was designed to offer the maximum
allowable side and differential clearance. The drivers side was left
tall to deflect heat from the exhaust.
KJ GAS TANK SKID
Laser cut, formed and welded
together for excellent accuracy and great looks. Our KJ skid is cut
from 3/16" steel and offers excellent protection against the elements.
Four drain holes are incorporated into the design and the factory
straps are used to secure the tank to the skid.
|
